Riva Air Solutions is leading supplier in all type of HVAC Coils. We are based in Boisar, Dist. Palghar, Near Mumbai. Finding extensive usage in meeting the Coils and air conditioning needs arising at client’s end, the range we offer includes AHU Coils, condenser Coil, cooling coil, Evaporator Coils, diffuser, double circuit cooling coil, tube type cooling coil, chill water-cooling coil, heating coil, fan coil unit and air handling unit. We offer a complete range of High Integrity HVAC equipment and coils suitable for use worldwide including Harsh Environments.
Applications :
- MALLS
- HOSPITALS
- HOTELS
- INDUSTRIES
- PHARMACEUTICAL INDUSTRY
- CLEAN ROOM AREAS
- FOOD INDUSTRY
- DAIRY PLANT
Performance :
- AHRI (Air-Conditioning, Heating, and Refrigeration Institute): AHRI has Developed industry standards for air conditioning, heating, and commercial refrigeration equipment. All coils are as per AHRI standards, so you know you’re getting dependable quality and performance in every product.
- Airflow (CFM): Cubic Feet per Minute, which refers to the amount of air flowing across the coil. A typical cooling coil should produce between 400-500 FPM. You want to avoid exceeding 550 FPM on all Chilled Water& DX Coils. Too little airflow means your coil is not running at peak capacity, while too much airflow can result in excess water carryover.
Construction :
- Casing Type: The supporting metal structure for tubes and the header. Different casing options include Flanged (standard), Slip & Drive, Inverted, Stackable, and Collared End Plates & End Plates only. Steam Coils require Pitched Casing to allow for adequate condensation drainage.
- Casing Material: The coil’s casing can be made from a variety of different materials. Options include: 14 or 16 Gauge, Galvanized Steel; Copper & Aluminum.
- Connection Material/Type: Standard connection types are MPT (Male Pipe Thread, threaded on the outside), FPT (Female Pipe Thread, threaded on the inside), ODS (Sweat Connections, no threads)
| SPECIFICATIONS OF COILS | |
|---|---|
HEADER |
MS OR COPPER |
MOC |
COPPER TUBE WITH ALUMINIUM FINS. |
COPPER TUBES | 1/2” DIA/24 TO 27 SWG. |
ALUMINIUM FINS | 0.15 SWG /11 TO 15 FINS PER INCH. |
U BEND | 22 SWG. |
END PLATES | 16 SWG/G.I SHEET END PLATES ON BOTH SIDES (SS304 END PLATES ON REQUEST). |
COIL DULY EXPENDED HYDRUCALLY | 2500 PSIG. |
TESTED | 400 PSIG. |
FIELD | NITROGEN |
Note: Special Hera site coating can be given on demand, options of various protective coatings are available on chargeable basis.
Product
Links
- About Us
- AMC
- Contact Us
Gallery
